Posted 20 hours ago

LimbSaver Grind-to-Fit Recoil Pad

ZTS2023's avatar
Shared by
Joined in 2023

About this deal

Clamp it all together and use a vertical belt sander for first shaping, if you want to hit it with oil and buff don’t actually oil until you get to around 400grit (or when it starts to look like a “good” surface) otherwise you’re just putting oil in chewed up rubber. With expert knowledge of scope mounting methods and a wide range of mounting hardware options, we can be sure to provide you with advice if needed. As well as producing a lot of rubber/Sorbothane dust the disk itself clogs up badly and I use a dressing block to remove this build up.

Before going on a high volume dove hunt in Argentina a few years ago, I tested several different brands of recoil pads on a Beretta Silver Pigeon 20 ga. We offer a range of products for adjusting your gun fit with recoil pads that will fit straight to your Beretta or Browning shotgun with no modification required, the slip on Beartooth range of recoil pads are a great way to alter your gun fit with no permanent changes to the gun. If you are the kind of guy that wants it 100% perfect looking, I'd go to a gunsmith that has experience with installing them. The Limbsaver worked best for me during the test, so I used during the trip and shot 3,000 rounds in four days. The EZG™ GRIND RECOIL PADS by Hogue provide ultra-soft recoil cushioning for your shoulder with a space-age, polymerized, synthetic rubber pad.

Next job is fit the butt pad, I use a fixture that is attached to the bench grinder and replicates the angle of the butt from the wrist area. Mfr Part: 10543 697438105430 Space-age, NAVCOM™ polymer, grind-to-fit recoil pad reduces bruising and recoil pain on your shoulder. The kickeez pads are pretty heavy, I've just put a 24mm on my beretta with a pitch spacer and in total it weighs 200 grams, the equivalent length beretta micropore pad weighs just 80 grams.

Worked perfect, this is the 2nd one I've installed on a rifle, and the second time it was a lot easier than the first. It is compatible with Dewey Stainless, Rig, and Hoppe’s rods, but requires adapters for Dewey Coated Rods, except for 17 and 20 caliber which fit directly. the lacing system is good but does loosen a little along the way but can be locked of with a simple bow if problematic .I am after a grind to fit recoil pad and if anyone would kindly give me their recommendation, that would be great. I have had little feedback on the Pachmeyer whereas several people on here have given the thumbs up to the Green Pad. We also offer a bespoke service of supply and fit for best London leather covered recoil pads, to give your gun that traditional look.

Unless the Goods are faulty We shall be entitled to recover any direct costs of having to recover the Goods from you and may set such costs off against the amount to be re-credited to you. The bullets feature a "Power Jacket" with serrations to ensure uniform expansion and maximum energy transfer on impact. Rubber backing keeps the hi-density inserts in place – which are constructed of closed cell foam, known for its exceptional high energy absorption properties. If you like to shoot, work on guns as a business or hobby, or just own a gun, this is the place for you! If you wish to do this job yourself I recommend aiming for the same or with the pad being very slightly larger than the pad so you can always finish it with a sanding block and in the absence of a sanding block use some 220 grit Aluminium Oxide paper wrapped around a piece of wood.They pattern well in the gun and give me consistent results and I will never change until legislation kicks in. If for some reason parcels are required to be redirected then an additional charge might be levied (where applicable). version features an opening for built-in swivel stud access, improved construction, and trim around all raw edges for excellent style. We don’t share your credit card details with third-party sellers, and we don’t sell your information to others.

so I think they are quite a narrow fit but length way's are a good fit so if you have wide feet may be go for the next size up .

If you are wondering, I use 150 grit Aluminium Oxide, it is a bit slower than say an 80 grit however it is a lot harder to take too much material off and gives a finish that needs a lot less finishing. I usually give the sides of the pad a light coat of a beeswax polish I make for my own use and it leaves the ground sides looking good. Unlike slip-on recoil pads, these pads will not slip or fall off and fit a wider range of gun types. In the past I would scribe and chalk the line in however this leaves a line that is hard to see and the scribe can ride up and mark the wood so I use a white wax pencil which gives a clear line to work with and cannot damage anything. Thick Kick-Eez recoil pads made of Sorbothane, provide shock absorption and reduces recoil effectively and quickly.

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment